How to Build a Privacy Fence With Metal Poles

How to Build a Privacy Fence With Metal Poles
By Michael Davidson, eHow Contributor | updated December 28, 2011
How to Build a Privacy Fence With Metal Poles thumbnail
An effective privacy fence prevents neighbors from seeing inside your yard.

A privacy fence is more concerned with limiting outside viewing of your home or yard then it is with security. As a result, you can use lighter materials like bamboo, or use traditional wood, vinyl or metal. Metal poles help anchor your fence so it remains strong against wind and other extreme weather conditions. Without proper support, your fence falls down or flies away before you can properly enjoy it.
Other People Are Reading

How to Build a Mesh Fence
How to Build a Wood Fence with Metal Poles

Print this article

Things You'll Need

Wooden stakes
Hammer
Tape measure

Show (4) More
Instructions

1

Call your utilities company to verify there aren't any utility lines under the area where you want the fence to go. This prevents a possible breach of a gas line or sewer pipe. Acquire any permits required in your state before installing your fence and make sure the fence is within your property lines.
2

Mark the location of the first post with a wooden stake by hammering it a few inches into the ground. This functions as a marker.

Sponsored Links
Steel Bollards

All Schedules, Sizes & Styles Low Price, Quick Quote & Turnaround
www.godawn.com/steel-bollards.asp
3

Measure down another 3 or 4 feet from the first stake with a tape measure and add another one. The more metal posts you use, the more stable your fence will be. If you want fewer posts, separate them no more than 8 feet apart -- any further and the posts won't provide adequate support.
4

Dig 3-foot deep holes where each stake is located using a shovel or a post hole digger. Most privacy fences are at least 6 feet tall and the posts require a 3-foot depth in the soil to adequately support the fence.
5

Place the posts in the holes. Add gravel equally on all sides to hold the posts straight. The gravel should at least fill the holes halfway.
6

Pour concrete mix into the holes to fill them. Leave about 3 inches of space at the top and wait for the concrete to fully dry. Keep the pole in the center of the hole so it doesn't lean once the concrete dries. The gravel should keep the pole in place but correct the pole manually and hold it upright as the concrete starts to dry if you notice it leaning.
7

Fill in the holes with dirt to hide the gravel and concrete underneath. The privacy fence can then be drilled into the posts using brackets, depending on what material you use. Bamboo often gets secured with construction wire.

http://www.budgetfencendeck.com

Dallas Fence Repair

Dallas Fence

Dallas Fence Companies